LIQUI MOLY – Top Tec 6100 0W-30 (20L) – Engine Oil – BMW Diesel & Gasoline engines.
Due to the low HTHS viscosity, the motor oil may only be used in approved BMW diesel and gasoline engines.
Motor oil based on synthetic technology. Ensures outstanding performance and a long engine service life. Improves the viscosity, lowers friction and reduces fuel consumption. Additives with a much lower proportion of ash-forming substances provide optimal protection for the diesel particulate filter from dirt. Keeps sensitive engine components clean.
Properties – excellent cold-start behaviour – ensures maximum engine performance – highest fuel economy – extremely low oil consumption – excellent wear resistance – ensures a long engine life – high engine cleanliness – very good temperature stability – engine components are kept clean and given excellent protection – contains much lower fractions of ash-forming substances – tested for turbochargers and catalytic converters
Specifications / Approvals
- ACEA C2
- API SP
- BMW Longlife-12 FE
- MBApproval 227.61
- MB-Approval 229.61
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required
- BMW 83 21 2 365 935
- BMW 83 21 2 405 097
- BMW 83 21 2 405 666
Technical data | |
Viscosity SAE class | 0W-30 SAE J300 |
Density at 15 °C | 0,845 g/cm³ DIN 51757 |
Viscosity at 40 °C | 47,0 mm²/s ASTM D 7042-04 |
Viscosity at 100 °C | 9,5 mm²/s ASTM D 7042-04 |
Viscosity at -40 °C (MRV) | < 60000 mPas ASTM D 4684 |
Viscosity at -35 °C (CCS) | ≤ 6200 mPas ASTM D 5293 |
Viscosity index | 190 DIN ISO 2909 |
HTHS at 150°C | ≥ 2,9 mPas ASTM D 5481 |
Pour point | -42 °C DIN ISO 3016 |
Evaporation loss (Noack) | 10,9 % ASTM D 5800 B |
Flash point | 230 °C DIN ISO 2592 |
Total base number | 9,0 mg KOH/g DIN ISO 3771 |
Sulfate ash | ≤ 0,8 g/100g DIN 51575 |
Color number (ASTM) |
L 2,5 DIN ISO 2049 |
Due to the low HTHS viscosity, the motor oil may only be used in approved BMW diesel and gasoline engines
The specifications and instructions from the assembly or vehicle manufacturer must be followed! Full effectiveness and protection for the diesel particulate filter only when the product is not mixed.