LIQUI MOLY – Synthoil Longtime Plus 0W-30 (5L) – Engine Oil – VW 503/506/506 01.
* For Volkswagen, Audi & Skoda vehicles with extended service intervals (WIV).
All-year oil for gasoline and diesel engines with and without pump-jet technology. Specially developed for vehicles with service interval extension (German abbreviation: WIV) from Audi, Volkswagen, Seat, Skoda. Tested safe with catalytic converters and turbochargers.
Special development for VW, Audi, SEAT and SKODA gasoline and diesel vehicles with service interval extension (also pump jet engines). The fully synthetic low-viscosity motor oil from the Longlife 2 generation keeps the engine perfectly clean. Exceeds the high Volkswagen test requirements. Reduces fuel consumption in one of the toughest consumption tests in Europe (CEC-L-54-T-96/ MB M 111) by more than 2.5% as compared with the specified reference oil. Fast cold-start oiling provides excellent engine wear protection during the start and warm-up phase.
Synthoil Longtime Plus SAE 0W-30 is a highly modern, fully synthetic, long-life engine oil which has been specially developed for the latest requirements for extending maintenance intervals. This engine oil is specified for gasoline and diesel engines with and without exhaust-gas turbocharging and pump injector-systems. The combination of an unconventional synthetic basis with advanced additive technology has resulted in a guaranteed low-viscosity engine oil which is stable to high shear. This product prevents deposit formation and reduces frictional losses in the engine while protecting it from wear. The results are savings in fuel and an extended service life for the engine.
Properties – excellent wear resistance – outstanding engine cleanliness – reduces frictional losses – tested for turbochargers and catalytic converters – high shear stability – optimum oil pressure under all operating conditions – extremely low evaporation loss – instant lubrication after cold start – outstanding lubrication reliability – highest fuel economy
Specifications / Approvals
- ACEA A5/B5
- VW 506 01
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required
- VW 503 00
- VW 506 00
Technical data | |
SAE class (engine oils) | 0W-30 SAE J300 |
Density at 15 °C | 0,855 g/cm³ DIN 51757 |
Viscosity at 40 °C | 52,6 mm²/s ASTM D 7042-04 |
Viscosity at 100 °C | 9,6 mm²/s ASTM D 7042-04 |
Viscosity at -35 °C (MRV) | < 60000 mPas ASTM D4684 |
Viscosity at -30 °C (CCS) | ≤ 6200 mPas ASTM 5293 |
Viscosity index | 169 DIN ISO 2909 |
HTHS at 150°C | ≥ 2,9 mPas ASTM D 5481 |
Pour point | -42 °C DIN ISO 3016 |
Evaporation loss (Noack) | 9,5 Gew.-% DIN 51581 |
Flash point | 220 °C DIN ISO 2592 |
Total base number | 10 mg KOH/g DIN ISO 3771 |
Sulfate ash | ≤ 1,6 g/100g DIN 51575 |
Color number (ASTM) |
2 DIN ISO 2049 |
Optimum for modern passenger vehicles with gasoline and diesel engines with and without turbochargers and also pump-injector-systems. Specially developed for VW motor vehicles with extended maintenance intervals from model year 2000 and the VW Lupo 3 l TDI.
The operating instructions of the vehicle and engine manufacturers must be followed.