DP31513/3C – EBC Redstuff Front Ceramic Brake Pads – Audi 8V RS3 & TTRS 8S

DP31513/3C – EBC Redstuff Front Ceramic Brake Pads – Audi 8V RS3 & TTRS 8S.

Pad Dimensions 95.00 x 75.00 x 14.00mm. R90 Approved. Contains 8 front brake pads & sensors.

EBC ‘redstuff’ Front Ceramic brake pads to fit Audi 8V RS3 & TTRS 8S (MQB) vehicles.

EBC ‘Redstuff’ are perfect high performance low dust ceramic brake pads for high performance European vehicles.

Features

• Ceramic Pad (low dust)
• ECE R90 brake safety tested and approved (fully road legal)
• Improves braking by at least 15%
• Does not suffer “fall of”
• Very Long lasting
• Gentle on rotors
• Excellent hot friction
• Excellent cold bite and cold braking performance
• Excellent high performance with repeated stopping
• Easy wash off and low damage to rotors
• Does not require new discs as supplied with ‘bed in coating’

EBC Redstuff Tech talk Video

EBC Brakes’ Redstuff is a premium NAO (Non-Asbestos Organic) ceramic-granule enhanced brake pad, available now for all modern cars, including hatchbacks/hot hatches, sedans, and muscle cars.

Ceramic pads are NON-METALLIC (therefore non-magnetic) and contain ZERO steel fibre, which is what causes brake dust and fast rotor wear. EBC Redstuff has always been fully compliant with ecological and environmental demands and includes no toxic ingredients such as lead, nickel, copper, or antimony sulfides, and certainly no asbestos as the NAO prefix indicates.

RedStuff Premium Low Dust Brake Pads

Redstuff is the EBC premium low dust pad for fast street driving on all types of cars and is even now available for truck and SUV with our ED range. Redstuff is an aramid fiber ceramic particle-enhanced premium brake material. We do NOT use ceramic fibers in any of our pads. Redstuff is free of sulphides or lead and a low dust material, and fully ECE R 90 brake safety tested and approved. There is always “Some:” dust from brakes as they wear but the major advantage of the EBC range is that we use zero steel fiber in our pads and instead use less aggressive aramid fibers such as Twaron®  and Kevlar® which are easy to wash off wheels and do not etch into wheel lacquers or alloy.

EBC Redstuff is also a long-wearing pad and as such takes approx 500Kms to fully bed down and show its full performance. To assist the bed-in, however, all EBC pads are surface coated with our Brake-in ™ pad brake in accelerator compound.

High friction formula improves brake effect 15%.

Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement. 

• EBC lowest dust fast street pad with 15% brake improvement
• Capable of repeated heavy brake use without brake “Fall-Off”
• Very minimal disc/rotor damage characteristics
• Superb material for Prestige imports/European and Asian cars
• ECE R 90 type approved for most cars
• Features red “brake in’ surface coating for instant safe braking after install
• Made with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond
• High Performance lowest dust rating pads for Prestige imports and faster street driving

There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second, they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up. This material is an aramid fibre-based brake compound enhanced with ceramic particles.

Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

Fitment: