JHM-B8LnkXRod – JHM Solid Linkage and Cross Rod Upgrade for Audi B8 A4-A5-S4-S5

JH Motorsports Solid Linkage and Cross Rod Upgrade for your B8 Chassis Audi!

PROUDLY DESIGNED AND BUILT AT JHM IN LATHROP, CA!!!

Here at JHM, we have been developing and building shifter and linkage upgrades for Audis since 2006. As we’ve done for the B5, B6, and B7 platforms, we’re bringing the JHM “Solid” shifting experience to your B8 Chassis Audi with our B8 Solid Linkage and Cross Rod Upgrade!

If you are looking for the ultimate shifting experience with precise feedback allowing for confident gear changes, the JHM B8 Solid Linkage and Cross Rod Upgrade is what you need. Our JHM B8 Linkage and Cross Rod setup is the ultimate upgrade for increasing the durability and longevity of your linkage components while dramatically improving the shifting experience of your B8 Audi.

 Adding our JHM Linkage and Cross Rod or a JHM Solid Short Throw Shifter alone won’t bring much noise or vibration into the cabin due to Audi’s ultra-silent, rubber lined shift knob. However, if you’re looking for the ultimate shifting experience with more of a race inspired setup, we recommend our Linkage, Shifter, and Shift Knob which can all be found in the same section as this product. NOTE: Adding in our shift knob and other variables like your exhaust setup, other lightweight/performance components (crank pulleys, flywheels, etc…), and factory tolerances may affect how much of an increase in interior noise, vibration and/or harshness you experience. Remember, Audi designed these components with lots of plastic and rubber to hide normal noises that the engine and transmission make so removing them can reveal some of those noises.

 This linkage and cross rod upgrade is a direct replacement for the OEM components. Our JHM Linkage and Cross Rod replaces the OEM plastic socket assemblies on both the linkage and the cross rod with 2 spherical steel bearings and one graphite impregnated, polyurethane bushing.

 JHM Linkage
On the linkage, we put a steel spherical bearing in a custom race at the end of the shift rod or selector shaft.

 JHM Cross Rod
Matching exactly the OEM dimensions, we attach our Cross Rod upgrade to a cage on top of the race using another, smaller spherical rod end housed in a bronze race for more rigid side to side feel. On the other end of the Cross Rod at the selector shaft cap on the transmission, we use a heavy duty, graphite impregnated, polyurethane bushing.

 Not only do these spherical and polyurethane bushings offer much more precise shifting while delivering more feedback than stock but they are also much more durable than the OEM plastic setup.

 Our JHM B8 Solid Linkage and Cross Rod Upgrade will deliver the ultimate shifting experience when paired with our JHM B8 Solid Short Throw Shifter. However, it will also dramatically improve your shifting performance if you only have a stock or aftermarket shifter.