LIQUI MOLY Super Leichtlauf 10W-40 1L – Engine Oil
All-year oil for gasoline and diesel engines. Tested safe with catalytic converters and turbochargers.Especially suitable for vehicles with high mileage. Synthetic technology low-viscosity motor oil. Especially good dirt-suspending and cleaning power. Prevents the formation of oil sludge. With advanced wear-protection technology. Keeps engine gaskets such as the shaft seal and valve stem seal elastic and ensures low oil consumption. For vehicles with tried and tested engine technology.
Low-friction motor oil based on synthetic technology. For the high requirements of modern, highperformance gasoline and diesel engines without maintenance interval extension. Saves fuel, provides optimum protection against wear and has a beneficial effect on sealing materials and thus on the leaktightness of engines. Therefore highly suitable for year-round use in vehicles with mileages of over 100,000 km.
Properties – instant lubrication after cold start – outstanding engine cleanliness – miscible with all commercially available motor oils – regenerates seals – high shear stability – especially suitable for vehicles with mileages over 100,000 km – high lubrication reliability – saves fuel and reduces pollutant emissions – maintains seals – smooth engine running – excellent wear protection – optimum stability to aging – tested for turbochargers and catalytic converters
Specifications / Approvals
- ACEA A3
- ACEA B4
- API SN
- MB-Approval 229.3
- VW 501 01
- VW 505 00
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required
- Fiat 9.55535-D2
- Fiat 9.55535-G2
- GWM
- HAVAL
- MB 229.1
- Peugeot Citroen (PSA) B71 2300
- Renault RN 0700
- Renault RN 0710
- Wuling
| Technical data | |
| SAE class (engine oils) | 10W-40 SAE J300 |
| Density at 15 °C | 0,87 g/cm³ DIN 51757 |
| Viscosity at 40 °C | 95,5 mm²/s ASTM D 7042-04 |
| Viscosity at 100 °C | 14 mm²/s ASTM D 7042-04 |
| Viscosity at -30 °C (MRV) | < 60000 mPas ASTM D4684 |
| Viscosity at -25 °C (CCS) | ≤ 7000 mPas ASTM D5293 |
| Viscosity index | 150 DIN ISO 2909 |
| HTHS at 150°C | ≥ 3,5 mPas ASTM D5481 |
| Pour point | -36 °C DIN ISO 3016 |
| Evaporation loss (Noack) | 12 % CEC-L-40-A-93 |
| Flash point | 232 °C DIN ISO 2592 |
| Total base number | 10,8 mg KOH/g DIN ISO 3771 |
| Sulfate ash | 1,0 – 1,6 g/100g DIN 51575 |
| Color number (ASTM) |
2,5 DIN ISO 2049 |
Ideal for vehicles with mileages of over 100,000 km and for modern gasoline, diesel, and turbocharged engines.
The specifications and instructions from the assembly or vehicle manufacturer must be followed. The optimum effect is only when the product is used unmixed.
