LIQUI MOLY – Top Tec ATF 1200 (20L) – Automatic Transmission Fluid – VW G052162, G052990, G055025.
For automatic transmissions, manual shift transmission, steering systems, hydraulic and lateral drives both in the car and in the commercial vehicle sector. Use according to the aggregate or car and transmission manufacturers prescribed specifications.
Synthetic technology automatic transmission oil of the latest generation. Prevents build-up of harmful deposits. Arrive at your destination faster and safer with maximum transmission performance and power reserves. Exceeds the highest test requirements demanded by renowned manufacturers. Ensures exact friction behavior and guarantees outstanding ageing resistance. Highest lubrication security under all conditions. Secures the functional performance of the aggregate and ensures long service life. With advanced wear-protection technology.
Top Tec ATF 1200 is an automatic gear oil from the latest generation based on synthetic HC base oils in combination with the latest high-performance additives. The outstanding composition of various base oil and additive components ensures optimum stability to aging, excellent protection against wear and good friction characteristics. Top Tec ATF 1200 conforms to the requirements of numerous unit and vehicle manufacturers and guarantees perfect operation of the units even under extreme operating conditions and when exposed to large temperature fluctuations. Also suitable for extended oil change intervals
Properties – highest thermal stability – excellent corrosion protection – enables a multifaceted range of applications – excellent viscosity/temperature properties – very good low-temperature properties – high chemical resistance – excellent wear protection – optimum stability to aging – outstanding friction characteristics
Approvals
- Allison C4
- Dexron III H
- Ford Mercon V
- Honda ATF Z1 (except CVT)
- Hyundai SP-II
- Hyundai SP-III
- JASO 1-A
- Kia SP-II
- Kia SP-III
- Mazda ATF M-III
- Mazda ATF M-V
- Mitsubishi SP-II
- Mitsubishi SP-III
- Nissan AT-Matic D Fluid
- Nissan AT-Matic J Fluid
- Nissan AT-Matic K Fluid
- Toyota Type T-II
- Toyota Type T-IV
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required
- Allison TES 295
- BMW 7045 E
- BMW 8072 B
- BMW LA 2634
- BMW LT 71141
- Caterpillar TO-2
- Chrysler ATF +3
- Chrysler ATF +4
- Daimler NAG-1
- JWS 3309 (Aisin Warner)
- MAN 339 Typ V1
- MAN 339 Typ Z1
- MAN 339 Typ Z2
- MB 236.2
- MB 236.5
- MB 236.6
- MB 236.7
- MB 236.9
- MB 236.10
- MB 236.11
- MB 236.91
- Subaru ATF
- Voith H55.6335.XX (G 607)
- Volvo 97340
- Volvo 97341
- VW G 052 162
- VW G 052 990
- VW G 055 025
- ZF TE-ML 02F
- ZF TE-ML 03D
- ZF TE-ML 04D
- ZF TE-ML 05L
- ZF TE-ML 09
- ZF TE-ML 11A
- ZF TE-ML 11B
- ZF TE-ML 14A
- ZF TE-ML 14B
- ZF TE-ML 17C
| Technical data | |
| Density at 15 °C | 0,850 g/cm³ DIN 51757 |
| Viscosity at 40 °C | 36,4 mm²/s ASTM D 7042-04 |
| Viscosity at 100 °C | 6,9 mm²/s ASTM D 7042-04 |
| Viscosity at -40 °C (Brookfield) | <= 20000 ASTM D 2983-09 |
| Viscosity index | 150 DIN ISO 2909 |
| Pour point | -48 °C DIN ISO 3016 |
| Flash point | 230 °C DIN ISO 2592 |
|
Color number (ASTM) |
rot |
For automatic transmissions, manual transmissions, steering systems, hydraulic systems and auxiliary drives both in passenger vehicles and commercial vehicles and in industrial applications. Usage according to the prescribed specifications from the unit or vehicle manufacturer. Universally applicable in European, American and Asian cars.
The specifications and instructions from the unit or vehicle manufacturer must be followed. Top Tec ATF 1200 can also be used for refilling systems in which traditional ATF oils are used. Optimum effectiveness, however, is only possible when the product is used on its own (i.e. no mixing).
