LIQUI MOLY Top Tec ATF 1800 (1L) – Automatic Transmission Fluid – Audi & Volkswagen ZF6 & ZF8 Gearboxes.
* service your ZF6/8 every 5 years or 70K. Your vehicle will feel much smoother, responsive and enjoyable to drive after a service.
* Recommended to service before tuning for all vehicles.
For Audi & Volkswagen ZF 6HP 19/21/26/28/32, ZF 8HP 45/50/55/65/70/75/90/95 automatic transmissions that are installed in various Audi & Volkswagen vehicles. Meets further specifications, allowing it to cover an even wider range of vehicles.
- VW G055005
- VW G055162
- VW G055540
- VW G060162
ZF8 – 9 litres
ZF6 – 6 litres (check with your mechanic)
Please note if you simply just drain the transmission something like 4 to 4.5 litres will only come out. A full flush or removal of the torque converter will take 9L or 6L.
If you wish to fully replace the fluid without a flush you will need to drain and cycle twice. (4.5L x 2).
If you just want a cheap one and done solution purchase 5L, and then service your transmission every 5 years or 70K.
Low-viscosity high-performance oil of the new generation for automatic transmissions. It is based on synthesis technology with modern, high-performance additives. Aside from excellent ageing and oxidation stability, optimal shifting is guaranteed under all operating conditions thanks to the extremely high viscosity index. It enables long oil change intervals.
Properties – excellent viscosity/temperature properties – prevents foam formation – enables a multifaceted range of applications – outstanding friction characteristics – high resistance to aging – very good low-temperature properties – excellent corrosion protection – high wear resistance – outstanding resistance to oxidation
Specifications / Approvals
- Dexron VI
- Ford Mercon LV
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required
- Aisin Warner AW-1
- BMW 83 22 0 142 516
- BMW 83 22 2 152 426
- BMW 83 22 2 289 720
- BMW 83 22 2 305 396
- BMW 83 22 2 305 397
- BMW 83 22 2 355 599
- BMW M-1375.4
- Fiat 9.55550-AV5
- Honda ATF 3.1
- Honda DW-1
- Hyundai SP-IV
- Hyundai SP-IV-RR
- Isuzu ATF WSI
- JASO 1A-LV
- JWS 3324 (Aisin Warner)
- Land Rover TYK 500050
- Mazda ATF FZ
- MB 236.12
- MB 236.14
- Mitsubishi Dia Queen ATFMA1
- Mitsubishi Dia Queen ATF-PA
- Nissan ATMatic S Fluid
- Nissan Matic P
- Toyota WS
- VW G055005
- VW G055162
- VW G055540
- VW G060162
| Technical data | |
| Density at 15 °C | 0,845 g/cm³ DIN 51757 |
| Viscosity at 40 °C | 28,5 mm²/s ASTM D 7042-04 |
| Viscosity at 100 °C | 5,8 mm²/s ASTM D 7042-04 |
| Viscosity at -40 °C (Brookfield) | ≤ 15000 mPas ASTM D 2983-09 |
| Viscosity index | 155 DIN ISO 2909 |
| Pour point | -48 °C DIN ISO 3016 |
| Flash point | 210 °C DIN ISO 2592 |
| Color / appearance | bräunlich/brownish |
| Color number (ASTM) |
4 DIN ISO 2049 |
Primarily developed for automatic transmissions of various manufacturers such as Aisin Warner, ZF etc., which are installed in various vehicles of Audi, BMW, Ford, Honda, Hyundai, Jeep, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes-Benz, Mini, Opel, Peugeot, Porsche, Toyota, VW, Volvo etc. Meets further manufacturer specifications, allowing it to cover an even wider range of vehicles.
The specifications and instructions from the assembly or vehicle manufacturer must be followed! Optimum effectiveness is only possible when the product is used unmixed.
